Ignition Lock Cylinder Opening Trim Cover Replacement

Fig 1: Identifying Ignition Lock Cylinder Opening Trim Cover

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Ignition Lock Cylinder Opening Trim Cover Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Ignition Lock Cylinder Opening Trim Cover Tip: Unclip the ignition lock cylinder opening trim cover from steering column lower trim cover. Separate the ignition lock cylinder opening trim cover from the steering column upper trim cover.