Rear Quarter Upper Trim Panel Replacement (without RPO E61)

Fig 1: Identifying Rear Quarter Upper Trim Panel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the seat belt anchor bolt. Refer to Rear Seat Number 2 Retractor Side Belt Replacement .
1	Rear Quarter Upper Trim Panel Retainer
2	Rear Quarter Upper Trim Panel Screw NOTE: Refer to Fastener Notice . Tip: Open the access door to remove screw. Tighten: 3 N.m (27 lb in)
3	Rear Quarter Upper Trim Panel Assembly Tip: Route the seat belt through trim panel.