LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Yukon Denali >> Repair and Diagnosis >> External Pages >> Different car >> Section 788 (Transfer Case - BW 4481-Nr3 - Service & Troubleshooting) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Cadillac Escalade EXT, 2006 Cadillac Escalade ESV, and 2006 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Input Shaft Seal Using J 23907 & J 36825
    GM819621Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: It may be necessary to use a sharp punch in order to poke a hole into the seal prior to inserting J 36825  . See Special Tools .
  1. Remove the transfer case. Refer to Transfer Case Assembly Replacement .
  2. Using J 23907  (1), and J 36825  (2), remove the input seal. See Special Tools .
scientia non olet · About LEMON Manuals