LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Yukon Denali >> Repair and Diagnosis >> External Pages >> Different car >> Section 788 (Transfer Case - BW 4481-Nr3 - Service & Troubleshooting) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Cadillac Escalade EXT, 2006 Cadillac Escalade ESV, and 2006 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Input Shaft Seal Using J 42738
    GM819657Courtesy of GENERAL MOTORS CORP.
  1. Using J 42738  , install the input shaft seal. See Special Tools .
  2. Install the transfer case. Refer to Transfer Case Assembly Replacement .
scientia non olet · About LEMON Manuals