Tools Required

J 38693  Oil Pump Seal Installer. See Special Tools .

1. Using the J 38693  , install the torque converter oil seal assembly (201). See Special Tools .
   Fig 1: Using J 38693 To Install Torque Converter Oil Seal

   Courtesy of GENERAL MOTORS CORP.
2. Lubricate the oil pump drive gear (205) and driven gear (204) with DEXRON®VI automatic transmission fluid.
IMPORTANT: The identification dots on the oil pump drive gear (205) must be facing up in order to ensure correct orientation of the drive flats.
Fig 2: View Of Oil Pump Drive Gear And Driven Gear
Courtesy of GENERAL MOTORS CORP.
3. Install the oil pump driven gear (204) and drive gear (205) with the identification dots facing up.