Output Shaft Seal Removal

Tools Required

• J 6125-1B  Slide Hammer. See Special Tools .
• J 23129  Universal Seal Remover. See Special Tools .

1. Remove the output shaft seal retainer ring (14).
   Fig 1: Identifying Output Shaft Seal Retainer Ring

   Courtesy of GENERAL MOTORS CORP.
2. Inspect the output shaft seal retainer ring (14) for damage.
3. Using the J 23129  and the J 6125-1B  , remove the output shaft seal (13). See Special Tools .
   Fig 2: Output Shaft Seal

   Courtesy of GENERAL MOTORS CORP.