Tools Required

J 36850  Transjel® Lubricant

1. Remove the direct clutch hub retainer ring (616).
   Fig 1: View Of Direct Clutch Hub Retainer Ring

   Courtesy of GENERAL MOTORS CORP.
2. Remove the direct clutch hub (615).
3. Install the forward clutch housing thrust washer (612) (bronze) on the inside of the forward clutch hub (613). Retain the thrust washer with J 36850  or equivalent.
   Fig 2: Identifying Direct & Forward Clutch Housing Thrust Washers

   Courtesy of GENERAL MOTORS CORP.
4. Install the direct clutch housing thrust washer (614) (plastic) on the outside of the forward clutch hub (613). Retain the thrust washer with J 36850  or equivalent.
5. Install the forward clutch hub (613) into the forward clutch housing assembly (602). Rotate the hub slightly in each direction in order to ease installation.
   Fig 3: View Of Forward Clutch Housing Assembly

   Courtesy of GENERAL MOTORS CORP.
6. Install the direct clutch hub (615) into the forward clutch housing assembly (602).
7. Install the direct clutch hub retainer ring (616).