Installation Procedure
WARNING: This page is about a different variant/trim than selected.
- Install the lower valve rocker arm cover gasket.
- Install the lower valve rocker arm cover.
- Install the lower valve rocker arm cover bolts.
- Tighten the lower valve rocker arm cover bolts in the sequence shown.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
- Install the fuel injectors. Refer to Fuel Injector Replacement (Left) or Fuel Injector Replacement (Right) .
- Install the upper left valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement - Upper Left .
NOTE:
Refer to Fastener Notice
.