LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Mechanical - 6.6L - On Vehicle Repair Instructions) >> On-Vehicle Repair Instructions >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil level indicator.
  2. Remove the exhaust manifold. Refer to Exhaust Manifold Replacement - Right (6.6L (LLY) Engine) .
  3. Remove the starter motor. Refer to Starter Motor Replacement (6.6L (LLY) Engine) .
  4. Remove the oil level indicator tube bolt at the indicator tube bracket.
  5. Remove the oil level indicator tube and O-ring seals.
    Fig 1: Oil Level Indicator Tube
    GM1602062Courtesy of GENERAL MOTORS CORP.
  6. Remove and discard the O-ring seals.
scientia non olet · About LEMON Manuals