LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Mechanical - 6.6L - On Vehicle Repair Instructions) >> On-Vehicle Repair Instructions >> Intake Manifold Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Loosen the intake manifold cover clamp (1) at the resonator.
    Fig 1: View Of Intake Manifold Cover
    GM1334378Courtesy of GENERAL MOTORS CORP.
  2. Loosen the intake manifold cover bolt (2).
  3. Remove the intake manifold cover.