LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Mechanical - 6.6L - On Vehicle Repair Instructions) >> On-Vehicle Repair Instructions >> Engine Oil Level Sensor and/or Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
IMPORTANT: When routing the oil level sensor wire, ensure that the wire is routed along the side of the oil pan.
  1. Install the oil level sensor (1) and bolt (2).
    Fig 1: View Of Oil Level Sensor & Components
    GM663624Courtesy of GENERAL MOTORS CORP.

    Tighten:  Tighten the bolt to 9 N.m (80 lb in).

  2. Install the oil level sensor clip (3).
  3. Install the lower oil pan. Refer to Oil Pan Replacement - Lower .
scientia non olet · About LEMON Manuals