Conditions For Running The DTC

DTC P0601

• The ignition switch is in the Run or Crank position.
• DTC P0601 runs continuously when the above condition is met.

DTC P0602

• The ignition switch is in the ON position.
• DTC P0602 runs continuously when the above condition is met.

DTC P0604

• The ignition switch is in the Run or Crank position.
• DTC P0604 runs continuously when the above condition is met.

DTC P0606

• The ignition switch is in the Run or Crank position, or the key is being turned OFF.
• DTC P0606 runs continuously when the above condition is met.

DTC P2610

• The PCM is powered down.
• DTC P2610 runs once every time the key is turned OFF.