Shift Control Housing Cleaning and Inspection
WARNING: This page is about a different variant/trim than selected.
- Clean the lower control lever and parts in cleaning solvent and air dry.
- Inspect the threads (1) on the lower control lever for damage.
- Inspect the lower control lever (2) for being bent.
- Inspect the pivot pins (3) on the lower control lever for excessive wear.
- Inspect the lower control lever pivot pins bushing for cracking or wear.
- Inspect the shift control housing for excessive wear in the pivot pin bushing slots (5).
- Inspect the lower control lever boot for tears or cracking.
- Replace any damaged components.