Special Tools

WARNING: This page is about a different variant/trim than selected.

Special Tools

Illustration	Part Number Description
Courtesy of GENERAL MOTORS CORP.	J 6125-B Slide Hammer
Courtesy of GENERAL MOTORS CORP.	J 8001 Dial Indicator Set
Courtesy of GENERAL MOTORS CORP.	J 8092 Universal Driver Handle
Courtesy of GENERAL MOTORS CORP.	J 8614-O1 Flange and Pulley Holding Tool
Courtesy of GENERAL MOTORS CORP.	J 22828 Input and Countershaft Race Installer
Courtesy of GENERAL MOTORS CORP.	J 22834-A Extension Housing Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 22912-O1 Split Plate Bearing Puller
Courtesy of GENERAL MOTORS CORP.	J 23129 Universal Seal Remover
Courtesy of GENERAL MOTORS CORP.	J 25070 Heat Gun 500-750F
Courtesy of GENERAL MOTORS CORP.	J 26900-13 Magnetic Indicator Base
Courtesy of GENERAL MOTORS CORP.	J 36513 Gear and Bearing Separator Plate
Courtesy of GENERAL MOTORS CORP.	J 38801 Input Shaft Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 38805 Output Shaft Nut Socket
Courtesy of GENERAL MOTORS CORP.	J 38807 Extension Housing Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 38856 Bearing Cup and Retainer Installer
Courtesy of GENERAL MOTORS CORP.	J 44707 T-Bar Push Puller
Courtesy of GENERAL MOTORS CORP.	J 44749 Split Plate Bearing Gear Puller
Courtesy of GENERAL MOTORS CORP.	J 44759 Adapter 3/8 NC to 5/8 NF
Courtesy of GENERAL MOTORS CORP.	J 45545 Adapter 3/8 inch NF to 5/8 inch NF