Special Tools

WARNING: This page is about a different variant/trim than selected.

Special Tools

Illustration	Tool Number/Description
Courtesy of GENERAL MOTORS CORP.	J 3289-20 Holding Fixture
Courtesy of GENERAL MOTORS CORP.	J 8092 Driver Handle
Courtesy of GENERAL MOTORS CORP.	J 23907 Slide Hammer with Bearing Adapter
Courtesy of GENERAL MOTORS CORP.	J 26941 Bushing and Bearing Remover - 3-4 inch
Courtesy of GENERAL MOTORS CORP.	J 36370 Drive Sprocket Needle Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 37668-A Output Shaft Seal Installer (4401 and 4470 Transfer Case)
Courtesy of GENERAL MOTORS CORP.	J 42738 Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 43484 Front Output Shaft Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 45380 Transfer Case Rear Bushing Remover and Installer
Courtesy of GENERAL MOTORS CORP.	J 45383 Input Gear Pilot Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 45759 Assembly Fixture