Transfer Case Disassembled View
WARNING: This page is about a different variant/trim than selected.
Callouts For Fig 1
| Callout | Component Name |
|---|---|
| 1 | Annulus Gear |
| 2 | Retaining Ring |
| 3 | Mainshaft Rear Bushing |
| 4 | Rear Output Shaft |
| 5 | Oil Pump Assembly |
| 6 | Retaining Ring |
| 7 | Tone Wheel |
| 8 | Rear Output Shaft Bearing |
| 9 | Retaining Ring |
| 10 | Retaining Ring |
| 11 | Rear Case |
| 12 | Plug |
| 13 | Speed Sensor |
| 14 | Bolt |
| 15 | Bracket |
| 16 | Rear Output Shaft Seal |
| 17 | Identification Tag |
| 18 | Screw |
| 19 | Drain Plug |
| 20 | Fill Plug |
| 21 | Oil Seal |
| 22 | Oil Tube |
| 23 | Carrier Assembly |
| 24 | Connector Tube |
| 25 | Oil Screen |
| 26 | Magnet |
| 27 | Sun Gear Thrust Washer |
| 28 | Retaining Ring |
| 29 | Sun Gear |
| 30 | Retaining Ring |
| 31 | Needle Roller Bearing |
| 32 | Sprocket |
| 32 | Sprocket |
| 33 | Chain |
| 34 | Stud |
| 34 | Stud |
| 35 | Input Gear Seal |
| 36 | Front Output Seal |
| 37 | Vent Assembly |
| 38 | Front Case |
| 39 | Retaining Ring |
| 40 | Split Dowel |
| 41 | Front Output Bearing |
| 42 | Retaining Ring |
| 43 | Front Output Shaft |
| 44 | Mainshaft |
| 45 | Viscous Coupling |
| 46 | Input Gear |
| 47 | Retaining Ring |
| 48 | Input Gear Bearing |
| 49 | Retaining Ring |
| 50 | Split Dowel |