Special Tools

WARNING: This page is about a different variant/trim than selected.

Special Tools

Illustration	Tool Number/Description
Courtesy of GENERAL MOTORS CORP.	J 2619-01 Slide Hammer
Courtesy of GENERAL MOTORS CORP.	J 3289-20 Holding Fixture
Courtesy of GENERAL MOTORS CORP.	J 5590 Pinion Bearing Race Installer - Rear
Courtesy of GENERAL MOTORS CORP.	J 8092 Universal Driver Handle
Courtesy of GENERAL MOTORS CORP.	J 22912-01 Split-Plate Bearing Puller
Courtesy of GENERAL MOTORS CORP.	J 23907 Slide Hammer with Bearing Adapter
Courtesy of GENERAL MOTORS CORP.	J 26941 Bushing and Bearing Remover - 3-4 in
Courtesy of GENERAL MOTORS CORP.	J 36370 Drive Sprocket Needle Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 37668-A Output Shaft Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 42738 Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 43484 Front Output Shaft Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 45380 Transfer Case Rear Bushing Remover and Installer
Courtesy of GENERAL MOTORS CORP.	J 45540 Tone Ring and Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 45548 Mainshaft Support Bushing/Bearing Remover
Courtesy of GENERAL MOTORS CORP.	J 45549 Mainshaft Support Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 45759 Assembly Fixture