LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (Engine Mechanical - 6.6L - Off Vehicle Repair Instructions (1 Of 3)) >> Off-Vehicle Repair Instructions (Part 1) >> Cooling Fan Pulley Removal

Cooling Fan Pulley Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the camshaft position sensor connector.
    Fig 1: View Of Camshaft Position Sensor Electrical Connector
    GM1334862Courtesy of GENERAL MOTORS CORP.
  2. Remove the cooling fan pulley bolts and nuts.
  3. Remove the cooling fan pulley.
    Fig 2: View Of Cooling Fan Pulley
    GM1334864Courtesy of GENERAL MOTORS CORP.
  4. Remove the camshaft position sensor retaining bolt.
  5. Remove the camshaft position sensor.
    Fig 3: View Of Camshaft Position Sensor
    GM1334865Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals