Exhaust Pipe Installation - Left

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Position the exhaust pipe gaskets with the tabs as shown. Failure to do so will cause improper alignment of the gaskets and result in exhaust leaks.

Fig 1: View Of Left Exhaust Pipe

Courtesy of GENERAL MOTORS CORP.

Install the exhaust pipe with gaskets.
Install the exhaust pipe to turbocharger bolts.

NOTE: Refer to FASTENER NOTICE .

Fig 2: Identifying Left Exhaust Pipe Bolt Tightening Sequence

Courtesy of GENERAL MOTORS CORP.

Install the exhaust pipe to exhaust manifold bolts.
Tighten: Tighten the exhaust pipe bolts to 53 N.m (39 lb ft) in the proper sequence.
Install the exhaust pipe heat shield.

Fig 3: View Of Left Exhaust Pipe Heat Shield & Bolts
Courtesy of GENERAL MOTORS CORP.
Install the exhaust pipe heat shield bolts.
Tighten: Tighten the exhaust pipe heat shield bolts to 10 N.m (89 lb in).