Low Stall Speeds (Stall in Ranges 1-6)

WARNING: This page is about a different variant/trim than selected.

Condition	Action
Engine not performing efficiently Plugged or restricted injectors High altitude conditions Dirty air filters Incorrect fuel/valve timing Throttle linkage broken or not adjusted correctly Electronic engine controls condition	The following specific sections should be helpful in defining the condition: Refer to Diagnostic System Check - Vehicle . Refer to Symptoms - Engine Mechanical (6.6L). Refer to Symptoms - Engine Mechanical (8.1L).
Stall speeds of 33% of normal implies freewheeling stator	Replace the converter assembly. Refer to Torque Converter Replacement .
Engine smoke controls	Compare lugback vs. static stall speed.
Incorrect torque converter	Install the correct torque converter. Refer to Torque Converter Replacement .