Excessive Slippage and Clutch Chatter

WARNING: This page is about a different variant/trim than selected.

Condition	Action
Incorrect speed sensor readings	See speed sensor DTCs.
Incorrect fluid level	Correct the fluid level. Refer to Transmission Fluid Checking Procedure .
Main pressure low	Repair the transmission.
TCC clutch not applied	Inspect the torque converter clutch system wiring, pressure, and controls. Repair as necessary.
Ranges 1, 2, 3, 4 Only
1-2-3-4 clutch slipping, leaks at rotating clutch seals, leaks at piston seals, 1-2-3-4 clutch plates worn	Inspect the 1-2-3-4 clutch plates, and piston and rotating seals. Replace/rebuild as necessary.
Ranges 4, 5, 6 Only
4-5-6 clutch slipping, leaks at rotating clutch seals, leaks at piston seals, 4-5-6 clutch plates worn	Inspect the 4-5-6 clutch plates, and piston and rotating seals. Replace/rebuild as necessary.
Ranges 3, 5, R Only
3rd, 5th and Reverse clutch slipping, leaks at piston seals, 3rd, 5th and Reverse clutch plates worn	Inspect the 3rd, 5th and Reverse clutch plates and piston seals. Replace/rebuild as necessary.
Range 2, 6 Only
2-6 clutch slipping, leaks at piston seals, 2nd clutch plates worn	Inspect the 2-6 clutch plates and piston seals. Replace/rebuild as necessary.
Ranges 1, R Only
Low and Reverse clutch slipping, leaks at piston seals, Low and Reverse clutch plates worn	Inspect the Low and Reverse clutch plates and piston seals. Replace/rebuild as necessary.