Conditions for Setting the DTC

DTC P2771 sets if one of the following conditions occurs:

Condition 1

• The 4WD low switch is in 4WD low.
• The transfer case is not in 4WD low.
• The TCC slip speed is -3,000 to -50 RPM.
• The transfer case ratio is 0.08-1.2, the transfer case ratio is the engine speed divided by the transfer case output speed.
• All conditions are met for 5 seconds.

Condition 2

• The 4WD low switch is not in 4WD low.
• The transfer case is in 4WD low.
• The TCC is commanded ON.
• The TCC slip speed is 100 to 3,000 RPM.
• The transfer case ratio is 2.5-2.9.
• All conditions are met for 10 seconds.