Conditions for Running the DTC

P2564

• The engine has been running for more than 3 seconds.
• DTC P2564 and P2565 run continuously when the above conditions are met.
• The ECM detects that the turbocharger vane position sensor signal voltage is less than 0.28 volts for more than one second.

P2565

• The engine has been running for more than 3 seconds.
• DTC P2564 and P2565 run continuously when the above conditions are met.
• The ECM detects that the turbocharger vane position sensor signal voltage is more than 4.8 volts for more than one second.