Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

No MAP sensor DTCs P0107 or P0108.
No TP sensor DTCs P0122 or P0123.
No TFP manual valve position switch DTC P1810.
The engine vacuum is 0-105 kPa (0-15 psi).
The engine torque is 54-542 N.m (40-400 lb ft).
The TP angle is greater than 12 percent.
The engine speed is greater than 3,000 RPM.
The transmission is not in PARK or NEUTRAL.