Circuit Description

The throttle position (TP) sensor 2 is a potentiometer type sensor with 3 circuits:

• A 5-volt reference circuit
• A low reference circuit
• A signal circuit

The TP sensor is used to determine the throttle plate angle for various engine management systems. The control module provides the TP sensor with a 5-volt reference circuit and a low reference circuit. The TP sensor then provides the control module with a signal voltage proportional to throttle plate movement. TP sensor 1 signal voltage is low at closed throttle and increases as the throttle opens. When the control module detects that the TP sensor 2 signal or TP sensor 5-volt reference voltage is outside the predetermined range, this DTC sets.