Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTCs P0068, P0107, P0108, P0120, P0220, P0506, P0507, P2135 are not set.
- The engine is running.
- The engine speed is between 500-5,000 RPM.
- Any change in the engine speed is less than 125 RPM.
- The traction control, if equipped, is not active.
- Any change in the air flow is less than 10 g/s.
- The A/C compressor clutch state does not change.
- The clutch switch state does not change, if equipped, with a manual transmission.
- The power steering load is stable.
- The brake switch state does not change.
- The above conditions are met for one second.
- DTC P0106 runs continuously when the above conditions are met.