LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Manual Transmission - NV 3500 - Service) >> Repair Instructions >> Shift Lever Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
  • Ensure that control lever is positioned into mechanical third or fourth gear prior to removal of shift lever from transmission. transmission must remain in this state when shift lever is removed.
  • Do not disassemble transmission shift lever. Internal parts for this shift lever are not available. Opening shift lever voids warranty.
  • When removing shift lever from transmission, use exposed bolts on base of lever.
  1. Remove control lever and boot. Refer to Control Lever and/or Boot Replacement .
    Fig 1: Removing Control Lever And Boot
    GM772342Courtesy of GENERAL MOTORS CORP.
  2. Remove boot.
  3. Remove shift lever bolts.
  4. Remove shift lever and seal.
  5. Remove shift lever insulator.
scientia non olet · About LEMON Manuals