LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Manual Transmission - NV 3500 - Service) >> Repair Instructions >> Control Lever and/or Boot Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    IMPORTANT: DO NOT move shift lever assembly adjustment nut if replacing control lever.
    Fig 1: Removing Control Lever
    GM772338Courtesy of GENERAL MOTORS CORP.
  1. Remove control lever.
  2. Remove control lever boot retainer plastic retainers, if necessary.
    Fig 2: Removing Control Lever Boot Plastic Retainers
    GM772340Courtesy of GENERAL MOTORS CORP.
  3. Remove control lever boot retainer, if necessary.
  4. Remove control lever boot screws, if necessary.
    Fig 3: Removing Control Lever Boot Screws
    GM772341Courtesy of GENERAL MOTORS CORP.
  5. Remove control lever boot, if necessary.
  6. Remove control lever insulator, if necessary.
scientia non olet · About LEMON Manuals