LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pedal Engine Start Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the clutch pedal position switch electrical connector (1).
    Fig 1: Disconnecting Clutch Pedal Position Switch Electrical Connector
    GM776950Courtesy of GENERAL MOTORS CORP.
  2. Remove the plastic retainer tabs from the clutch pedal position switch.
  3. Remove the clutch pedal position switch from the pushrod.
scientia non olet · About LEMON Manuals