LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pedal Engine Start Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the clutch pedal position switch to the pushrod with the plastic tabs.
  2. Connect the clutch pedal position switch electrical connector (1).
    Fig 1: Connecting Clutch Pedal Position Switch Electrical Connector
    GM776950Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals