LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Actuator Cylinder Replacement (ZF S6-650) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the clutch actuator cylinder.
    Fig 1: Installing Clutch Actuator Cylinder (ZF S6-650)
    GM776228Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the clutch actuator cylinder bolts.

    Tighten:  Tighten the bolts to 8 N.m (71 lb in).

  3. Install the manual transmission. Refer to TRANSMISSION REPLACEMENT (ZF S6-650).
scientia non olet · About LEMON Manuals