LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Actuator Cylinder Replacement (NV3500/NV4500) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the manual transmission. Refer to TRANSMISSION REPLACEMENT (NV 3500) or TRANSMISSION REPLACEMENT (NV 4500).
  2. Remove the clutch actuator cylinder bolts.
    Fig 1: Removing The Clutch Actuator Cylinder Bolts (NV3500/NV4500)
    GM772346Courtesy of GENERAL MOTORS CORP.
  3. Remove the clutch actuator cylinder.

    If required, the clutch release bearing can be removed from the clutch actuator cylinder for replacement.

scientia non olet · About LEMON Manuals