Disassembly of Shift Valve Body

WARNING: This page is about a different variant/trim than selected.

Fig 1: Compressing Shift Valve 1 Spring

Courtesy of GENERAL MOTORS CORP.

Using J 43773 (2), compress the shift valve 1 spring until retaining clip (1) is loose. See Special Tools . Remove retaining clip (1).

Fig 2: Removing Spring And Shift Valve 1

Courtesy of GENERAL MOTORS CORP.

Fig 3: Compressing Shift Valve 3 Spring

Courtesy of GENERAL MOTORS CORP.

Using J 43773 (2), compress the shift valve 3 spring until the retaining clip (1) is loose. See Special Tools . Remove retaining clip (1).

Fig 4: Removing Plug, Spring, And Shift Valve 3

Courtesy of GENERAL MOTORS CORP.

Fig 5: Compressing Shift Valve 2 Spring

Courtesy of GENERAL MOTORS CORP.

Using J 43773 (2), compress the shift valve 2 spring until the retaining clip (1) is loose. See Special Tools . Remove the retaining clip (1).

Fig 6: Removing Plug, Spring, And Shift Valve 2

Courtesy of GENERAL MOTORS CORP.

Fig 7: Compressing Control Main Valve Spring

Courtesy of GENERAL MOTORS CORP.

Using J 43773 (2), compress the control main valve spring until retaining clip (1) is loose. See Special Tools . Remove retaining clip (1).

Fig 8: Removing Spring And Control Main Valve

Courtesy of GENERAL MOTORS CORP.

Fig 9: Removing Solenoid Screen

Courtesy of GENERAL MOTORS CORP.