Shift Speed (M33 Only)
WARNING: This page is about a different variant/trim than selected.
Shift Speed (M33 Only)
| - | 1-2 Upshift @ +/- 250 RPM Output Shaft Speed | 2-3 Upshift @ +/- 250 RPM Output Shaft Speed | 3-4 Upshift @ +/- 250 RPM Output Shaft Speed | 1-2 Upshift @ Wide Open Throttle +/- 250 RPM, Output Shaft Speed | 2-3 Upshift @ Wide Open Throttle +/- 250 RPM, Output Shaft Speed | 3-1 Wide Open Throttle Downshift +/- 100 RPM, Output Shaft Speed | MIN TCC Apply @ 12% (RPM) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| % of TPS | 12 | 25 | 50 | 12 | 25 | 50 | 12 | 25 | 50 | - | - | - | - | ||
| Trans Cal | Body | Axle | - | - | - | ||||||||||
| 5.3L (LM7) | |||||||||||||||
| Normal Shift Pattern | C10/20 K10 |
3.73 | 553 | 711 | 1225 | 904 | 1189 | 2046 | 1248 | 1639 | 3279 | 1461 | 2844 | - | 1146 |
| 5.3L (LM7) | |||||||||||||||
| Tow/Haul Shift Pattern | C10/20 K10 |
3.73 | 750 | 810 | 1264 | 1620 | 1868 | 2674 | 2346 | 2820 | 4740 | 1738 | 2765 | - | 4740 |