LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Flexplate Replacement (5.3L Engine w/RPO HP2) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the flexplate.
    Fig 1: View Of Flexplate & Bolts
    GM1281915Courtesy of GENERAL MOTORS CORP.
  2. Install the flexplate bolts.

    Tighten:  Tighten the bolts to 100 N.m (74 lb ft).

  3. Remove the J 46093  (1) and bolts.
    Fig 2: Removing J 46093 & Bolt
    GM1277133Courtesy of GENERAL MOTORS CORP.
  4. Install the transmission. Refer to Transmission Replacement (5.3L Engine w/RPO HP2) .
scientia non olet · About LEMON Manuals