LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Transfer Case - NVG 149-NP3 - Service & Troubleshooting) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transfer case. Refer to Transfer Case Assembly Replacement .
  2. Remove the input shaft seal, using a flat-tipped screwdriver.
    Fig 1: Removing Input Shaft Seal
    GM678215Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals