LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Transfer Case - NVG 263-NP1 - Service & Diagnosis) >> Repair Instructions >> Transfer Case Shift Control Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the instrument panel (IP) cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
  2. Pull the tabs on the side of the transfer case driver control switch out.
    Fig 1: Removing Selector Switch From Housing
    GM396838Courtesy of GENERAL MOTORS CORP.
  3. Pull the transfer case driver control switch straight out from the panel.
scientia non olet · About LEMON Manuals