LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Transfer Case - NVG 246-NP8 - Service & Diagnosis) >> Repair Instructions >> Transfer Case Shift Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the shift control module electrical connectors.
    Fig 1: Disconnecting Shift Control Module Electrical Connectors
    GM885116Courtesy of GENERAL MOTORS CORP.
  2. Unsnap and remove the shift control module from the bracket.
    Fig 2: Removing Shift Control Module
    GM856631Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals