LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Transfer Case - NVG 246-NP8 - Service & Diagnosis) >> Repair Instructions >> Transfer Case Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. If the vehicle is a 1500 series, remove the transfer case shield bolts, if equipped.
    Fig 1: View Of Transfer Case Shield & Bolts
    GM826834Courtesy of GENERAL MOTORS CORP.
  3. Remove the transfer case shield, if equipped.
  4. If the vehicle is a 2500 series, remove the transfer case shield screws, if equipped.
    Fig 2: Removing Transfer Case Shield & Bolts (2500 Series)
    GM396828Courtesy of GENERAL MOTORS CORP.
  5. Remove the transfer case shield, if equipped.
scientia non olet · About LEMON Manuals