Component Testing
WARNING: This page is about a different variant/trim than selected.
- Remove the fuel filter/heater element housing from the vehicle.
- Connect the ignition 1 voltage circuit of the fuel heater to a battery voltage source and connect the ground circuit of the fuel heater to a ground.
- Cool the thermostatic switch of the fuel heater with ice.
- Observe the heating element.
- If the thermostatic switch does not turn on the heater element when the temperature is between -8.4°C and +15.4°C (+16.9°F and +59.8°F) replace the fuel filter/heater element housing.