LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 8.1L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Level Indicator & Tube
    GM843859Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil level indicator from the indicator tube.
    2. Fig 2: View Of ECT Sensor Electrical Connector
    GM843867Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the engine coolant temperature (ECT) sensor electrical connector.
  3. Remove the ECT sensor connector from the indicator tube.
    4. Fig 3: View Of Indicator Tube Bracket
    GM843863Courtesy of GENERAL MOTORS CORP.
  4. Remove the indicator tube bolt.
  5. Remove the indicator tube bracket.
  6. Remove the O-ring seal from the indicator tube.
scientia non olet · About LEMON Manuals