LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 8.1L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Sight Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Unsnap the intake manifold sight shield from the stud.
  2. Remove the sight shield from the sight shield bracket.
    Fig 1: Intake Manifold Sight Shield
    GM843779Courtesy of GENERAL MOTORS CORP.
  3. Remove the sight shield bracket retainer nuts (1), if necessary.
  4. Remove the sight shield bracket from the studs (2), if necessary.
scientia non olet · About LEMON Manuals