LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - 6.6L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Rail Fuel Feed Pipe Replacement - Right >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine wiring harness. Refer to Engine Wiring Harness Assembly Replacement .
  2. Remove the water outlet. Refer to Water Outlet Tube Replacement (6.6L (LLY) Engine) in Engine Cooling.
  3. Remove the exhaust gas recirculation (EGR) cooler tube. Refer to Exhaust Gas Recirculation (EGR) Valve Cooler Tube Replacement .
  4. Disconnect the right fuel rail feed pipe fittings (1, 3).
    Fig 1: View Of Fuel Rail Feed Pipe
    GM1387855Courtesy of GENERAL MOTORS CORP.
  5. Remove the fuel rail pipe clamp bolts (2).
    6. Fig 2: View Of Fuel Rail Balance Pipe & Bolts
    GM1335586Courtesy of GENERAL MOTORS CORP.
  6. Remove the right fuel rail feed pipe.
scientia non olet · About LEMON Manuals