LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - 6.6L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Feed Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the water outlet tube. Refer to Water Outlet Tube Replacement (6.6L (LLY) Engine) .
  2. Disconnect the fuel feed line quick connect fitting. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
  3. Remove the oil level indicator tube bolt.
  4. Remove the oil level indicator tube bracket bolts and bracket.
    Fig 1: Removing Bracket Bolts
    GM1601448Courtesy of GENERAL MOTORS CORP.
  5. Reposition the exhaust gas recirculation (EGR) coolant pipe hose clamp.
  6. Remove the EGR coolant pipe hose.
  7. Remove the EGR coolant pipe bolts.
    Fig 2: View Of Exhaust Gas Recirculation (EGR) Coolant Pipe, Hose & Bolts
    GM1335419Courtesy of GENERAL MOTORS CORP.
  8. Remove the EGR coolant pipe.
    9. Fig 3: View Of Fuel Feed Pipe & Bolts
    GM1335584Courtesy of GENERAL MOTORS CORP.
  9. Remove the fuel feed pipe nut and clip bolts.
  10. Remove the fuel feed pipe.
scientia non olet · About LEMON Manuals