LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - 6.6L - Introduction (2 Of 2)) >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the cooling fan pulley. Refer to Cooling Fan Pulley Replacement (6.6L (LLY) Engine) in Engine Cooling.
  2. Remove the camshaft position (CMP) sensor bolt.
  3. Remove the CMP sensor.
    Fig 1: Removing Camshaft Position Sensor
    GM1334865Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals