Washer Pump Replacement (Silverado)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Windshield Washer Pump (Silverado)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the windshield washer system container. Refer to Windshield Washer Solvent Container Replacement . Place the washer container on a bench top and secure. Using two flat-bladed tools, pry gently upward on the pump in order to disengage the pump from the washer container grommet. Discard the grommet.
1	Windshield Washer Pump Tip: Use full strength windshield washer solvent for a lubricant on the pump spout in order to ease the installation of the new washer pump into the new grommet.

Callout

Component Name

Preliminary Procedures

Remove the windshield washer system container. Refer to Windshield Washer Solvent Container Replacement .
Place the washer container on a bench top and secure.
Using two flat-bladed tools, pry gently upward on the pump in order to disengage the pump from the washer container grommet.
Discard the grommet.

Windshield Washer Pump
Tip: Use full strength windshield washer solvent for a lubricant on the pump spout in order to ease the installation of the new washer pump into the new grommet.