LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 992 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Windshield Upper Reveal Molding Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Upper Reveal Molding from Windshield
    GM105242Courtesy of GENERAL MOTORS CORP.
  1. Install the upper reveal molding (1) to the windshield (2).
  2. Align the notch in the molding to the center mark on the upper paint band on the windshield.
  3. Press the upper reveal molding on to the windshield starting at the center and working outboard to both sides.
  4. Install the windshield. Refer to Windshield Replacement .
scientia non olet · About LEMON Manuals