Rear Door Window Belt Outer Sealing Strip Replacement (Extended Cab)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Door Window Belt Outer Sealing Strip

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rear Door Outer Belt Sealing Strip Procedure Lifting upward on the sealing strip end in order to unhook it from the door flange. Install the sealing strip to the flange of the door and push downward until fully seated.

Callout

Component Name

Preliminary Procedure

Position the door window as needed for service.
Tape off the lower window frame to prevent damage to the door.
Remove the outside mirror. Refer to Power Mirror Replacement .

Rear Door Outer Belt Sealing Strip

Procedure

Lifting upward on the sealing strip end in order to unhook it from the door flange.
Install the sealing strip to the flange of the door and push downward until fully seated.