Endgate Linkage Replacement (Pickup Box)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Endgate Linkage (Pickup Box)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the Pickup Box Endgate Latch Handle Bezel. Refer to Pickup Box Endgate Latch Handle Bezel Replacement (Utility) or Pickup Box Endgate Latch Handle Bezel Replacement (Pick Up) . Remove the endgate latch. Refer to Endgate Latch Replacement .
1	Pickup Box Endgate Linkage Tip: Release the rod from the pickup box endgate handle and pull the rod through the endgate latch opening.

Callout

Component Name

Preliminary Procedures

Remove the Pickup Box Endgate Latch Handle Bezel. Refer to Pickup Box Endgate Latch Handle Bezel Replacement (Utility) or Pickup Box Endgate Latch Handle Bezel Replacement (Pick Up) .
Remove the endgate latch. Refer to Endgate Latch Replacement .

Pickup Box Endgate Linkage
Tip: Release the rod from the pickup box endgate handle and pull the rod through the endgate latch opening.