LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 991 (Door Lock Systems & Door Handles) >> Repair Instructions >> Door Striker Replacement (Extended Cab, Upper) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: If both of the door striker bolts are removed at the same time, the striker backing plate will fall into the body. This will result in additional time to perform the repair.
    Fig 1: View Of Door Striker Components
    GM1829310Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper trim door upper striker cover (2).

    Pull straight downward for the trim cover to release, retained by retainer clips (1).

  2. Remove the door upper striker bolts (3).
  3. Remove the spacer, if equipped.
  4. Remove the door upper striker (4).
scientia non olet · About LEMON Manuals